Fast Drilling Speed Equivalent to an Electric (AC) Model *1
Drills fast like an AC rotary hammer with a combination of the highly efficient brushless motor and high power output MULTI VOLT battery.
*1: When fully charged with the dust extractor system detached. In comparison with the DH28PCY rotary hammer. The performance depends on the workpiece material and operating conditions.
Runtime per Charge
Approx. 90 holes *2
With the BSL36A18 battery. When drilling into concrete with a ø8.5mm x 40mm drill bit.
*2: The value is for reference purposes, and depends on the workpiece material and operating conditions.
More Lightweight and More Compact *1
Same Power. Less Size.
The compact and lightweight MULTI VOLT battery enables a significant reduction in the overall size of the tools.
*1: Compared to the DH36DBL cordless rotary hammer.
*2: Without the dust extractor system, the DH36DPB has the same weight and size as the DH36DPA.
Pic.1: The grip of the handle and the drill bit head are on the same line of action, which makes applying force to drill easier.
Pic.2: The grip of the handle is close to the center of gravity for easier handling.
Reactive Force Control(RFC)
When the tool bit is suddenly overburdened during operation, the slip clutch works or the tool's built-in controller stops the motor's output before the entire tool jerks.
Depending on operating conditions, the Reactive Force Control function may not work or may not provide the specified performance. Make sure that the workpiece is placed and supported properly, and that the main unit is held firmly during operation.
Quick-Release Tool Retainer
allows for fast change between the SDS-plus drill bit holder and the drill chuck holder (DH36DPD).
Note: Turn the change lever to "Hammering only" mode when replacing a tool retainer with another. Use the machine only in "Rotation only" mode when the drill chuck holder installed.
Dust Extractor System
High-Efficiency Particulate Air filter ensures clean air exhaust.
Drilling Depth Adjustment up to 85mm
Max drilling depth: 85mm
Max Stroke: 100mm
Detachable Dust Box for Easy Dust Disposal
The Brush Cap and Nozzle Seal for Minimum Dust Escape
Delayed Stop Function
When the tool's switch is released, the dust extractor system's internal motor stops after a delay of several seconds so as to vacuum remaining dust particles in the internal parts.
Cross Platform Compatibility
The dust extractor system included with the DH36DPB fits on the DH36DPA, DH36DBL, and DH18DBL.
The one included with the DH36DPD fits on the DH36DPC, DH36DBQL, and DH18DBQL.
No Load Speed
0 - 1,100/min
Full Load Impact Rate
0 - 4,300/min
Vibration Total Values (triax vector sum)*4
Hammer Drilling into Concrete
Vibration emission value ah, HD = 15.4 m/s2
Vibration emission value ah, HD = 16.2 m/s2
Uncertainty K = 1.5 m/s2
Standard Accessories *5
2 Batteries (BSL36A18), Battery Cover, Charger (UC18YSL3), Side Handle, Depth Gauge, Terminal Cover, Carrying Case
2 Batteries (BSL36A18), Battery Cover, Drill Chuck Holder, Charger (UC18YSL3), Side Handle, Depth Gauge, Terminal Cover, Carrying Case
*1: Specifications are for when a dust extraction unit has been installed. When used with the dust extraction unit uninstalled, the specifications are the same as those for DH36DPA.
*2: Specifications are for when a dust extraction unit has been installed. When used with the dust extraction unit uninstalled, the specifications are the same as those for DH36DPC.
*3: Weight according to EPTA-Procedure 01/2003.
*4: The vibration total values were determined according to EN60745.
*5: Supplied accessories vary by country or area.
Dust Extractor System
Dust Extractor System for DH36DPA / DH36DBL / DH18DBL (included with DH36DPB)
Dust Extractor System for DH36DPC / DH36DBQL / DH18DBQL (included with DH36DPD)
For use with 18V or 36V
(depending on the voltage specifications of tool to which it is attached)
Dust Box Capacity
Diameter of Drill
4.3 - 20mm (11/64" - 25/32")
Max.Length of Drill (effective length)
50 - 100mm (1-31/32" - 3-15/16")
Dimensions (W x H x D)
90 x 306 x 378mm (3-35/64" x 12-3/64" x 14-57/64")
90 x 306 x 411mm (3-35/64" x 12-3/64" x 16-3/16")
Dust Box Set (Filter included)
In order to read a PDF file, you need to have Adobe® Reader® installed in your computer.